Clicky

Can You Use Epsom Salt In A Jetted Tub? (Answered!)

Can You Use Epsom Salt In A Jetted Tub? (Answered!)


Epsom salt, commonly known as magnesium sulfate, is a complex mixture of oxygen, magnesium, and sulfate. It soothes muscular aches and stiffness, decreases inflammation, and helps ease stiff joints when employed as a bath salt, which begs the question, can you use Epsom salt in a jetted tub?

You can use pure Epsom salt in plain water jetted tubs. Warm water easily dissolves Epsom salt, and there is little risk of clogging if you use one that does not include essential oils. The Epsom salts should be free of carrier oils, and the water should not contain any chemicals.

Always verify the manufacturer’s suggested guidelines before adding Epsom salt to a jetted tub. Find out more in this post.

What can you not put in a jetted tub?

Can You Use Epsom Salt In A Jetted Tub? (Explained Further)

Epsom salts help create a soothing environment. Anecdotal research suggests they can assist with the following conditions: bruises, arthritis, sunburn, psoriasis, stiff joints, insomnia, and many more.

Epsom salts are an almost miraculous chemical you can safely use in pure water jetted bathtubs. If used appropriately and flushed regularly, it should not harm the mechanism of the bathtub.

That is not to say that you should add too many Epsom salts to your jet tub. If you use it every time you wash without cleaning the unit, it may leave sediments inside the jet system that could harden.

However, the chemical dissolves easily in pure water and should not impede the system’s functionality. It’s also worth noting that many Epsom salts contain scents and oils that might harm your plumbing.

If you have a hot tub with chlorinated water, putting Epsom salt in it might inflict injuries and avoidable damage. Therefore, don’t use this mixture of magnesium, sulfate, and oxygen in your hot tub.

Pure Epsom salt has acidic properties that can alter the hot tub’s pH level and overall alkalinity, exposing the tub equipment to corrosion. After bathing, ensure you empty and clean the jet tub.

How Can You Use Epsom Salts In A Jetted Tub?

Here’s how to bathe in a therapeutic Epsom salt jetted tub without jeopardizing your health:

  • Half-fill your jetted tub with hot or warm water and add two cups of Epsom salt to the area closest to the hot water inlet.
  • If your jetted tub is bigger, use four cups. Since this is the hottest part of the jet tub, the Epsom salt will break down better.
  • Turn off the jets for the time being and allow enough time for the magnesium sulfate to dissolve in hot water. If there are no more salt granules at the bottom of the bathtub, it means the salt has dissolved completely.
  • Switch on the tub jets and swirl the water more to disintegrate any lingering Epsom particles.
  • Relax in the jetted tub for 20–30 minutes, permitting the Epsom salt to work its charm on your skin and muscles, and then wash off any salt particles.
  • Shut off the jets and leave the jetted tub.
  • Wrap a robe or towel over your body to ensure that your warmed muscles remain warm.
  • Bathe with warm water for 5-10 minutes to remove any Epsom salt accumulation.
  • Since Epsom salt can dry your skin, apply a moisturizing moisturizer to prevent dry skin.

It’s important to rinse your jetted tub after such an Epsom salt bath to eliminate mineral deposits that could ruin the tub’s walls. Epsom salt accumulation can damage the jets’ and drain area’s systems.

How To Clean A Jetted Tub After An Epsom Salt Bath

Cleaning a jetted tub after having an Epsom salt soak is critical to avoid the collection of mineral deposits that might eat away the tub’s walls. Epsom salt accumulation can also wear down the jets’ and drain area’s systems.

While you could technically leave the hot water in the jetted bathtub for a few days, doing so raises the chance of tub damage. Follow the procedure below to clean your jetted tub after an Epsom salt bath:

  • Drain the bathtub altogether.
  • Rinse the tub’s walls with a plastic jug, taking note of the region surrounding the jets.
  • Spray the water intake, the jets, and drain sections with a mixture of pure filtered water and a few droplets of dish soap using a plastic spray bottle with a powerful stream of water.
  • After each 8–9 Epsom salt washes, take a conventional bath with only typical tap water, leaving this water boost to clean the jet motors and other tub fittings.
What happens if you put Epsom salt in a hot tub?

Safety Tips for Using Bath Salts In A Jetted Tub

  • Read the manufacturer’s instructions to determine if bath salts are safe to use.
  • When looking for bath salts, choose pure ones over sensual ones with aromatic oils.
  • Before adding the bath salt, make sure your water is warm enough to allow it to dissolve fully.
  • Clean the tub and jets regularly to avoid residue accumulation.
  • When utilizing jetted tubs having chemical-infused water, refrain from using plain Epsom salt; instead, use tub-specific Epsom salt.

What Are The Benefits Of Using Epson Salts In A Jetted Tub?

Epsom salts come with the following benefits:

  • Using plain Epsom salts without any additional oils or perfumes in a pure jetted bathtub enhances the soothing effect of the water massage. You can achieve this by including medicinal properties.
  • Epsom salt is a mineral required by multiple body fluids. It assists in the elimination of contaminants by supporting the body’s enzymatic activities.
  • It also helps your body manufacture more serotonin, a mood-enhancing chemical, and relieves congestion from the lymph nodes.

Can You Use Epsom Salts In Chlorinated Water?

Professionals caution against combining chemicals with additives such as Epsom salts in water. This is because the salts could alter the chemical properties of the water, causing a burning sensation on your skin.

Moreover, the salts might cause harm to the plumbing system. You can use jetted bath Epsom salts because they don’t have carrier oils which are hazardous to your jets, not to mention their inability to compromise the chemical composition of water.

Can You Use Epsom Salts In Plain Water?

Epsom salts can be used comfortably in a jetted bathtub filled with pure water. If you use the bathtub properly and flush the plumbing regularly, it should not damage the tub’s mechanism.

However, using the salts frequently without cleaning your jet tub will leave residues in your tub, which could be a problem when they harden. In contrast, Epsom salts dissolve readily in normal water and should not block the system’s operation.

Do Epsom Salts Expire?

Epsom salt is an organic substance with no expiration date. An old package of Epsom salts could become hard or clumpy over time.

Therefore, the substance is still good to use in its natural state, without any additional oils or fragrances.

However, if additional components have been combined with Epsom salts to make a bath salt mixture, it will most certainly expire. Check the expiry date on store-bought items because households often use homemade items within a few months.

Can you use essential oils in a jetted tub

Final Remarks, Can You Use Epsom Salt In A Jetted Tub?

Epsom salt in a jetted tub can help with muscular discomfort, inflammation, and flushing toxins from your body. Epsom salt, when paired with the therapeutic characteristics of a jet tub, is the ideal treatment for a hurting or stressed body.

Although you can use Epsom salt in the jet bathtub, you must take steps to prevent salt residue from hardening within your jet system.

Also Read:

Recent Posts